Heavy Duty Waterproof Generator Cover for 3500w-12000w Generators

what our customer say this product:

Powered by

1. Blake Verified Buyer – 25 July 2024

   I really liked the quick shipping and it was a great price to keep my generator safe from the elements if I have it in the shop or outside.
   Pros: fits very well on my champion 3550 running watts generator. Covers the whole generator top to bottom. Material seems well made with a lot of extra connection points to the frame. Also has quick velcro points and plastic snaps for tightening up your cover.
   Cons: I would have preferred a zipper in the front rather then the velcro. More security but I could see the zipper rusting 🤷
   Conclusion: I’m happy with my purchase. Would purchase again and I would recommend this product to other people.
   

2. Jimmy Walls Verified Buyer – 1 August 2024

   It’s a great cover. Fit my predator 2000 watt generator perfectly.
   

3. Lisa beeson Verified Buyer – 1 August 2024

   Wonderful back up, paid for in my eyes during just 1 power outage. Easy to use. I use propane only. Stored for a year, and cranked right up.
   

4. randy willett Verified Buyer – 2 October 2024

   Cover up the generator perfectly! Let’s see how it deals with a winter 🙂
   

5. Todd P. Verified Buyer – 16 November 2024

   The cover looks to be in good quality. It covers the EcoFlow pretty well. Getting the elastic opening over the handle part is a little bit cumbersome but other than that, it fits perfectly.

   

6. Anonymous Verified Buyer – 1 March 2025

   Using to cover my 4000/3200 watt Predator generator. Every once in a while, buyers come across a great product. This gen cover is one of those buys! The manufacturer ‘nailed it’ when they made this. Apparently, according to a color brochure included in the package, they make many other covers for outside products/use such as grills and furniture etc. Without a doubt I will be purchasing more items from this manufacture as time goes on. It’s much better and heavier material than I expected, and it fits like a glove around my generator. The manufacturer offers a three year warranty. My generator has a 10 inch wheel kit installed on it. The cover (26x20x20) fits over both wheels and also over the handle. However, it is a little tight around the wheels and handle but not a problem at all. Because the wheels are plastic they could remain uncovered and all would be fine since they will not rust. It fits just right if I don’t cover the wheels and instead just place the cover behind the wheels (wheels will be exposed). But, IMO, the unit looks much nicer with the wheels covered. So, it would be nice to have just a tiny bit more room in the fabric to allow for covering wheels. Probably, most users of generators have the wheel kit anyway because even my small 4000/3200 watt unit before I installed a wheel kit weighs in at 150 pounds with a full 4 gallon gas tank – too heavy for most people to lift. Added the wheel kit and now its weighs is close to 160 pounds. Conclusion: Very happy and will buy other products from this manufactuer. BTW, this 4000/3200 watt Predator is connected to my whole house (2500 sq. ft.) outside using a simple generator inlet box. Under a heavy load of having my propane furnace, propane hot water heater and my well pump on all at the same time (2800 watts nominal) I still have 400 watts available for lights etc. The only appliance not used or tested is my electric clothes dryer but we use a clothesline anyway so NBD. I intentionally bought this small generator after using my clamp on amp meter to determine how much power I really needed. This benifits me big time since it uses much less gasoline than a larger unit would. This unit is no longer availble at Harbor Freight. I has been superceeded with the 4375/3500 watt unit. Special note: Most generators (including Predators) are shipped “Bonded Neutral” as they are meant to be used with extension cords to different devices. If connected to a house (which IS legal) it may need to be reconfigured as a “Floating Neutral” generator to meet NEC codes depending on how your main utility line to the house switches or does not switch the utility service neautral leg. Do your homework before you connect it to your house via a generator inlet box or contact an licensed electrician for proper configuration. Thanks for reading.

   

7. Paul Davies Verified Buyer – 7 March 2025

   I bought this thinking it would have a square frame built in and would cover my suitcase generator so it just flops over the geny and does not fit snug
   

8. Dave Verified Buyer – 9 March 2025

   The case is much bigger inside than advertised. With about 2 inches all the way around my Bluetti EB3A. I was all ready to raise h#ll, when I noticed my original Bluetti box still had the high-quality top and bottom foam clam pieces. I put them in this carry bag and was AMAZED. They fit like they were made for it. PERFECT. And of course the EB3A WAS made to fit the foam perfectly. Now it’s exactly centered and balanced. If you too own an EB3A and have the original box and foam, definitely buy this bag.

   

9. miss j y gibson Verified Buyer – 13 March 2025

   Fits my generator perfectly, waterproof so far, and has handy Velcro straps to stop the cover blowing away in the wind.
   

10. Beachy Keen Verified Buyer – 6 April 2025

    It has held up so far through this winter. It does not provide a tight fit. Good enough to keep things dry. No trouble with wind blowing it apart.
    

11. Enrique Verified Buyer – 7 April 2025

    Buen material tiene bolsas pará guardar herramientas y manual para el mantenimiento
    

12. Doug & Justine Albrecht Verified Buyer – 8 April 2025

    Perfect fit for my generator keeps everything clean and ready to go when needed. Easy on and off. Protected generator thru storms
    

13. Ronnie Smith Verified Buyer – 13 April 2025

    Great fit at a GREAT price. Very durable