50FT 10AWG Solar to XT60i Extension Cable for Power Station RV Battery

what our customer say this product:

Powered by

1. airaddict Verified Buyer – 6 April 2024

   Well, as long as you verify your panel doesn’t exceed the input rating of your device. This 25-foot 10 AWG solar extension cable is a solid choice for any device that accepts the XT60i connection and could benefit from durable and efficient wiring. It’s quality construction, 10AWG wire, MC4 connectors (a little snug fit, but no issues), XT60i that appears to legitimately gold plated, and nice heat shrink that makes the final cable water tight. The insulation appears weatherproof and well-suited for outdoor applications like ground setups and RV systems. The use of 10AWG means less voltage drop and the rating of the wire well-exceeds the rating of the XT60i connector, so there’s no concern of a hit to efficiency, like you’ll find in some other cables that use 12AWG or even 14AWG. The price is reasonable, not cheap, but priced fairly enough that it’s worth just buying versus DIYing.
   

2. Anonymous Verified Buyer – 23 May 2024

   This review is for the Kimbluth brand 10 AWG, 25 foot, XT60i solar extension cable. This is regular 2 conductor 10 gauge wire with MC4 solar connectors on one end and a female XT60i on the other. The fit and finish of the cable is excellent. The nuts on the MC4 connectors are on super tight. Heat shrink tubing is over the back of the XT60 to the cable to offer strain relief and some purchase when disconnecting. The product listing claims that the center pin of the XT60 is grounded. It is not. It is a shame, because this is otherwise an excellent product.

   

3. Corey340 Verified Buyer – 24 July 2024

   I needed a long cable for the solar panel on the roof of my outdoor shed to keep my small portable power station and lawn tractor batteries charged so I got this cable. Since the shed is 8 feet high, this 20 foot cable has enough length to go down the outside of the shed without me having to put a hole in the roof. It works out fine.
   

4. Avid couch surfer Verified Buyer – 30 September 2024

   This MC4 to XT60i extension cable feels high quality and works well with EcoFlow solar power stations. I have two Delta Pro 3 stations and one Delta 2 solar power stations. The XT60i connector has the reverse polarity protection diode on the XT60i connector side and the anti arch protection.

   The MC4 connectors fit snugly and the anti arc feature of the XT60i at the solar power station connector side means I can connect and disconnect under load. The tinned solid copper core cable with 10AWG means it can support high current loads while still being exposed to direct sunlight. The tinned copper is better for corrosion protection than standard copper wires.
   

5. Chris R Verified Buyer – 2 January 2025

   This cord has all the right specs: 600V capacity, 10 AWG wire, and 102 degrees Celsius insulation rating. I’m using this to connect some panels to a Bluetti system. The voltage rating lets me run the panels in series to raise voltage and manage the amp load, while the 10 AWG wire helps me minimize voltage drop and maximize how much of what my panels generate can be stored and used. While a 12 AWG wire will work, once the wire length gets over 15 feet or so, I recommend you look for a 10 AWG wire to minimize loss. Plus, this will be very durable and last a long time.

   If you need to plug into an XT60i plug, and the length works for you, this is a great choice and value.
   

6. Allen Rue Verified Buyer – 2 March 2025

   The main thing I notice about my 10AWG MC4 to Xt60i cable sold here is its weight. I own several 10AWG solar cables. It is heavier than almost any other solar cable with MC4 attachments I have. However, it is not the thickest of the ones I own. Maybe the wire is better? If that says anything about its quality, the weight might be the difference. My solar cable has been working admirably for three sunny days now and I have zero doubts the cable life will be long. I have had no trouble moving the cable around the yard chasing the best energy from the sun. The XT-60i end has some extra-long protection that is really not necessary, but I think they are trying to produce a quality cable here.

   

7. Anonymous Verified Buyer – 4 April 2025

   This review is for the Kimbluth brand 10 AWG, 25 foot, XT60i solar extension cable. This is regular 2 conductor 10 gauge wire with MC4 solar connectors on one end and a female XT60i on the other. The fit and finish of the cable is excellent. The nuts on the MC4 connectors are on super tight. Heat shrink tubing is over the back of the XT60 to the cable to offer strain relief and some purchase when disconnecting. The product listing claims that the center pin of the XT60 is grounded. It is not. It is a shame, because this is otherwise an excellent product.

   

8. sean_fitz_tx Verified Buyer – 7 April 2025

   This review is for the Kimbluth Store 10AWG 20FT Solar to XT60i Extension Cable.
   I ordered this cable so I could put my EcoFlow generator out of the sun when charging it.
   This is a well made cable, there is no excess mold flashing to cut the hands. All edges are finished and rounded.
   I grabbed by trusty old Fluke VOM and tested the connections. The conductors exhibited continuity and very low resistance. The XT60 end fit snugly into the EcoFlow battery chassis. I happen to like a very firm connection so that the connections make/break during small movements, increasing resistance and overheating. The MC4 ends were also firm to attach/disconnect from the solar output cables. I almost needed a MC4 wrench, but ultimately did not . This is NOT a bad thing. Again, I like my connections to be firm.
   This is an excellent cable for connecting solar panels to various brands of battery generators. I recommend buying one if you need one.