Generator Covers While Running. Generator Cover Measures 32”Lx24”Wx24”H. Double-layer Fabric. Side Access to Control Panel and Top Access to Add Fuel. Fits Most 5,000-15000 Watt Generators, Grey.

what our customer say this product:

Powered by

1. TAJ Verified Buyer – 21 December 2024

   Poor fit, but the cover was designed for a larger unit, I suppose. Easy to install by slipping over. Good appearance if fitted and so far hasn’t faded in sun and seems to have good durability.

   

2. Donna P Verified Buyer – 1 January 2025

   I recently bought a 13000w whole house generator from Duro Max to replace my smaller generator I “donated” to my son. I needed a good cover for it as this sits outside along the back of the house. I will make a place for it under the gazebo at some point. This cover fit the bill perfectly. I couldn’t ask for a better fit. Durability? Have to wait and see how it holds up over time. The top of the cover is not solid as it appears in the picture so I do have to drain the rain water that accumulates in the top after a heavy rain. other that that I’m entirely pleased with the cover so far.
   

3. Jason Verified Buyer – 27 January 2025

   Great cover works amazing. Would put bungee cords around if traveling on highway with it on
   

4. ClinchMtnMan Verified Buyer – 5 February 2025

   This appears to be a well made product and as described. It actually is a little large for my 8,000 Generic generator but that’s okay; covers the generator completely. The clear “window” doesn’t line up with the dashboard of my unit but that doesn’t really matter. It comes with a bungee cord long enough to go around the entire unit and holds the cover on nicely.
   

5. Michael Walls Verified Buyer – 1 March 2025

   Haven’t run the generator ON with the cover on, but have it on covering it from Florida rains. So far, so good!
   

6. Matty M. Verified Buyer – 7 March 2025

   Says i needed this cover fir my duromax 13,500 watt generator, but it’s way too big.
   

7. P Rivo Verified Buyer – 14 March 2025

   Superior quality, sturdy and good value for the money.
   

8. Pat Shannon Verified Buyer – 26 March 2025

   This is a very sturdy and well-made Gen cover. I ordered it for my WGen9500DF Port gen knowing from the measurements that it would be a little lose fitting. I purchased 3 ten ft length 3/4″ PVC (around $18.00) and a 10 pack of 3/4″ 3-way fittings from tugapower.net at $14.52. You may want to measure yourself, but I cut (using a 1-1/4″ retching pex cutter) four 22″ wide lengths and four 30″ long lengths for the frame. The 3-way fittings on each end add to the width and length. You cant do a perfect square on the bottom due to the wheels but the frame is sturdy enough to support the cover which can then be adjusted to vent the exhaust and other end for air. I ran the gen for about 15 min and everything held in place and seemed a little quieter. Not sure how it would hold up during very high winds but I’m planning to secure all fastenings to the Gen and maybe weight it down if needed. This seems to work just as well as running covers I’ve seen advertised at a much higher cost. The main thing is that this is a very well-made cover with good heavy material. Should last a long time. Good luck.
   

9. Louie Louie Verified Buyer – 1 April 2025

   Easy to cover and remove

   

10. Brenda Dunlop Verified Buyer – 19 April 2025

    Very nice fit just right was able to easily get to all the plugins and fuel Would recommend it to anyone