50FT XRDS RF Solar Connector to XT60 10AWG Extension Cable

what our customer say this product:

Powered by

1. Crazy Fish Verified Buyer – 23 June 2024

   I recently got a portable power station and it needs an XT60 plug. I seem to have every other plug for my other power stations but this one. 15 feet is a great length to hook up a portable solar panel and still have the power unit on the table. The MC4 connectors fit well and the other end fit perfectly. Not much snazzy going on here, and that’s the point.
   

2. Snapperheadjoe Verified Buyer – 9 September 2024

   This cable is very well made with good connector protection. I am not sure this is 10AWG cable; I own several 10AWG solar cables and they are all much thicker and less pliable that this one. This cable looks to me like it was built using 12AWG cabling instead. It is possible that this cable uses a thinner sheathing which may explain why it is thinner that other 10AWG cables I own however I am still concerned that there is no way for me to validate whether the correct gauge of cable was used. I have run 400 Watts (solar power) for several hours through this cable to my Solix generator and found no hot spots.

   If you plan on running larger power loads through this cable I’d suggest verifying that it is indeed 10AWG. The maximum I can push through will be able 670 watts which probable wouldn’t cause any issues even with a 12AWG cable.
   

3. Migs Verified Buyer – 9 December 2024

   Anyone running a portable setup will quickly find out that the cables that come with your portable generator are usually not long enough to put the generator in a cool location unless you’re lucky enough. That’s where these cables come in. I hooked these up to three 200 watt panels and was able to move the solar generator inside, closer to the appliances that were using it. Keep in mind that there are longer version of this but mind the current. The cable is well made, as are the connectors. the XT60 connector fits perfectly on both of my solar generators (as they should), and disconnecting the solar panels was a bit easier than with the original cables. Remember that you should NOT disconnect any of these cables under load, and that includes when the solar panels are pushing out power (fold them or turn them upside down). Overall very happy with the purchase, definitely something you want to use for a portable generator vs a permanent system simply because of how electricity works. The protective wrap around the connector interface is definitely a plus, possibly saving you from some embarrassing times when putting the panels away.
   

4. Robert Verified Buyer – 20 January 2025

   This is a great DC extension for solar at 25ft, and really nice connectors that are solid and strong. I would trust this cable outside!
   

5. Mas Verified Buyer – 16 February 2025

   Quality product. Connectors fit well.
   

6. Darryl Verified Buyer – 17 February 2025

   I bought this 25FT Solar Connector to XT60 Cable to allow me to have my solar panels in the sun while I have my Ecoflow solar generator inside or in the shade staying cool, if I am using it outside. I was impressed how this cable was made: It has a quality XT60 plug on one end and they used heat shrink tubing to extend the protected grab area of the plug. On the other end are two MC4 connectors that are securely connected to the 10 gauge wires. I really like they used a red and black pair wires that are attached to each other for the entire distance, except the last few inches near the plugs. I have another cord for my bigger solar panels that came as separate wires which are quite a mess to deal with. I ended up zip tying them together every few feet. Being a combination Red/Black pair wire allows you to separate only the distance you need for a neat installation. The wires are clearly marked 10AWG which I got to avoid voltage drop over the distance. The wires do seem to be made of pure copper as they passed the magnetic test. I am happy with the cable I bought.

   

7. Michael Verified Buyer – 15 March 2025

   The XT plug on this cable is a XT60H version. The XT60H is an upgrade version of XT60 plugs. The size is smaller and will not fit. The description does not distinguish, but calls it an XT60. I decided to keep the cable and buy XT60H plugs for my other cable the connects to my Bluetti PVinput .